Contains 4 high quality Sunex 1500lb car dollys, making it easy to raise a stationary car off the floor and roll it in any direction around a garage without starting or driving.

Tire Pressure Inflator w/TPMS, Tire Depth Guage, Lug nut socket set

DIY Specialty Socket Kit

Complete set of four OTC 3-ton capacity jack stands for 12,000lbs total of load bearing support. Steel.

Light up your work! Contains essential lighting most commonly used in automotive maintenance and service work, including magnetic flashlights, head lamp, LED ceiling illumination, and under-hood lighting

Ideal for removing transmission oil pans or working on an engine on a stand. Comes with oil drain pan, wide pan funnel, and no-splash pad. 4.5 gallon capacity.

Comes with all the basic essentials for changing fluids on your car, such as engine oil or transmission fluid.

Includes pick up tools and magnetic tray. Don't let a dropped bolt or nut ruin your day, have the right pickup tool for any crevice or void.

Kit includes all blasting wands, vacuum adapter, media blaster, and walnut media needed for cleaning the intake ports of your M57N2 diesel engine

Kit includes cylinder head vacuum adapter, media blasting wand, and media blaster with 10 pounds of blasting media, allows you to clean carbon from the intake ports of your N14 or N18 engine

Includes all the hardware components to connect a laptop with an RJ45 port to a SPA or CMA chassis Volvo for diagnostics and software loads.

Comes with all the basic essentials for changing fluids on your car, such as engine oil or transmission fluid. This kit comes with a floor jack and jack stands.

Comes with a compact steel floor jack and a complete set of four Performance Tool 2-ton capacity jack stands for 8,000lbs total of load bearing support.

Complete set of four Performance Tool 2-ton capacity jack stands for 8,000lbs total of load bearing support. Steel. Double locking with ratcheting and pins.

Includes a Genuine Volvo gasket roller and Genuine Volvo anaerobic gasket maker for perfect oil-tight sealed flanges. 1.7floz

14mm HEX x 13mm BOX

Used to remove and replace the valve stem seals without removing the cylinder heads from the engine

Used to remove and replace the valve stem seals on the BMW N63/S63 V8

Used to remove and replace the valve stem seals on the BMW N62 V8 engine without removing the intake or exhaust camshafts

Excellent for applying the large torque load required for the Porsche Center Lock Wheel Nut